Capillary tubes have significant advantages in geometric accuracy and surface quality, not only possessing excellent straightness, roundness, and concentricity, but also controlling surface roughness at an extremely low level.
 |  |  |  |
Its dimensional accuracy is excellent, with deviations in inner diameter, outer diameter, wall thickness, and length strictly limited to a very small range. At the same time, the quality of pipe end processing is superior, fully meeting the stringent requirements of high-precision application scenarios.
 |  |  |  |
| SPECIFICATIONS OF SEAMLESS TUBE |
OD: 0.08--6MM
WT: 0.015MM-1.5MM
LENGTH: ≦12M
COIL LENGHT: ≦500M
 |  |  |  |
Condition
Heat Treatment: Annealing/Bright annealing /Solution Treated/Stress released
Hardness: Cold Hardened,Half hardened ,1/4 Hardened,Soft Ect
Surface: Pickled ,Passivated,Bright ,Grinded,Polished,Cleaned , Sanitary level ,Etc
 |  |  |  |
| Product Attributes |
Type
Straight
Coil
On real
As per drawing or sample
MATERIAL：
AUSTENITIC STAINLESS STEEL：TP304,TP304L,TP304H,TP304LN,TP316/TP316L,TP316H,TP316Ti,TP316LN,TP321,TP321H,
TP317,TP317L,TP347,TP347H,TP310S,TP310H,TP904L,254Mo.S30432,S31042,N08367，253Ma S30815 ,S38810
Duplex & Super Duplex Steel: S31500,S32101,S32003,S32304,S31803,S32205,S32750,S32760
Corrosion resistant alloys:
N08800, N08810, N08825, N08020, N06600, N06690, N10276, N06625
Nickel based alloys:
GH3030 (Ni80Cr20) GH3039, GH3536 (Hastelloy X), GH4090 (N07090), GH4141 (N07041, Rene 41), GH4145 (N07750), GH4169 (N07718)
Soft magnetic alloys:
1J18, 1J30,1J36 (UNS K93600), 1J46 (UNS K94490, Alloy 1), 1J48 (UNS K94840, Alloy 2), 1J77 (UNS N14076, Alloy 3), 1J85 (UNS N14080, Alloy 4)
Nickel: Ni 200 (N02200, N6), Ni 201 (N02201, N5)
Titanium: TA1 (Gr.1), TA2 (Gr.2), TA3
Titanium alloys: TA9 /TA9-1, TA10, TC4 (Gr.5)
