CALL US ANYTIME +86-577-86383608
Contact Us
inner banner

How Should the Inner Wall of Stainless Steel Capillary Tube Be Cleaned?

Stainless steel capillary tube is a stainless steel product with a small inner diameter, which is mainly used for needle tubes, small parts components, industrial line tubes and so on. The capillary tube often needs to be cleaned during the normal use of the stainless steel capillary tube. Because the diameter of the pipe is relatively small, the cleaning of the inner wall is often more troublesome. WENZHOU HUASHANG STEEL CO., LTD will introduce the precautions and cleaning methods for the use of stainless steel capillary tubes.

1. Precautions for the use of stainless steel capillary tubes

(1) The 304 stainless steel capillary tubes are arranged reasonably, laid firmly, horizontal and vertical. Its switches and valves are installed flat, which are flexible and convenient to use.

(2) The water supply stainless steel capillary tubes and accessories are tightly connected. There is no leakage in the water pressure test. The water outlet is unobstructed, and the water meter operates normally.

(3) The stainless steel capillary tube for drainage should be unobstructed, non-blocked, and leak-free. The bottom of the bathtub should be higher than the bend of the drainage channel, and the floor drain should be slightly lower than the ground.

(4) The stainless steel capillary tube is firmly installed, and the appearance is smooth and without damage.

From these requirements and precautions, it can be seen that the installation process of stainless steel capillary tube is a scientific and rigorous, not the kind of pipes that we often see that can be installed at will. Because of these little attention, the installation of stainless steel capillary tube can affect people's daily life. Therefore, the installation of stainless steel capillary tubes should be careful and strict.

2. The inner wall cleaning method of stainless steel capillary tube

If the cleanliness requirement is low, immerse the stainless steel capillary tube in the heated degreasing solution, then circulate and flush with air or water. It is better to have a brush of the right size to scrub back and forth. In short, it is necessary to heat and use a degreasing liquid or cleaning liquid that effectively dissolves and disperses the grease attached to the inner wall.

If cleanliness requirement is high, ultrasonic cleaning can be used. The principle of ultrasonic cleaning is that when the ultrasonic wave propagates in the liquid. The sound pressure changes sharply, resulting in a strong air phenomenon in the liquid, and millions of tiny cavitation bubbles are generated every second. These bubbles are quickly and massively generated under the action of sound pressure, and they will not explode violently, but generate strong impact and negative pressure suction, which is enough to quickly peel off stubborn dirt.

If the 304 stainless steel capillary tube produced by capillary tube supplier is relatively long and has its own water tank, you can buy an ultrasonic vibration plate and put it into the water for ultrasonic cleaning. If the time is not long, you can insert the ultrasonic vibrator into the pipe for cleaning, and then rinse off the dirt peeled off by the ultrasonic wave with tap water.

SSTUBECN can also offer the following tubing:
steel hydraulic tubing
hex tube
precision tubes
medical stainless steel tubing
aerospace tubing
If you have any questions, WE are here to help!

Related News

More Tubing Fittings To Consider